I have a GP2X video out cable that I took apart hoping to modify. Sadly I am stuck there because this is an S-Video cable which means there are 4 wires for the video instead of two. The audio cables have 2 wires each, one wire is unshielded. Is there anyone who is wire savy that could help me make a video out cable from the GP2X video out cable? Any point in the right direction would be of big help. About the only thing I know from the cable is the pin configuration for the lead end of the S-Video wire.
there is no S-Video. It's a CVBS or composite video out. One pin is the ground. There's 1 pin for video, and 2 pins for audio. All 3 of them are grounded to the 1 ground, so it's 4 wires/pins total. I'm surprised there hasn't been as much feedback to this thread as I would expect, since TV-out was sort of a misidentified feature some of us bought the wiz to have in addition to it's small size. really it should be pretty simple to solder an RCA connector to the 2 pins required for video, but does audio still come out of the wiz in that mode? If not it will definitely be more challenging of a connector to make.