103 replies to this topic

[jonlad1]

Sengoku 3 still has strange graphical issues, no life bar, stuff like that

Screen scaling is so good

[Blue Protoman]

Prehistoric Isle 2 is screwed up. A lot of graphics are either missing or broken (mostly missing).

[pepone]

I'm aware of these bugs. I'm still short on free time, so I can't fix them all at once.
you can check know bugs here
https://spreadsheets.google.com/ccc?key=0AuNKTLRzlFiKdGg5TnQteU9tb2NTUVF6d1c2dHdDRmc&hl=en&authkey=CKL2moEK

[Perky_Goth]

I keep trying several versions of the roms, but only a couple actually run. A few ones just crash gngeo outright. What should I be looking for? (fell free to PM me, hint hint)

This from Pepone helped me : "I tried a romset made for a really more recent version than mame 0.106 and it work."

Yeah, thanks, turns out my download wasn't actually finished overnight.
Works like a treat. If only I were any good at fighting games... at least there's infinite continues

[MontyQ]

How can I change the button mapping in games I can'tsee a option to do so and I like my jump and fire buttons on different ones then the default ?

ty

[MontyQ]

bumping this been 3 days lol

also is there a front end we can use with this like rage on the gp2x/wiz ?

ty

Edited by MontyQ, 13 May 2011 - 05:37 PM.

[jumpman]

also is there a front end we can use with this like rage on the gp2x/wiz ?

I don't believe so, but that would be very cool, as that frontend rocked!

Chris

[MontyQ]

Well with no option to map any buttons to where I like I tried ginge with the gp2x neogeo emu it loads but the games dont always crashes with lasest and older romsset so i assume it can't work. Too bad it has controller mapping and save states.

This new emu tho looks great with streatch screen its not full black all around just abit tho but as I stated anuone know how to change the buttons? The config file has nothing its almost blank lol

Ty all for the help if there is

[pepone]

To configure button mapping, you have to edit the file named gngeorc in gngeo_pepone/conf and add the following line:

p1control A=K281,B=K279,C=K278,D=K280,START=K308,COIN=K306,UP=K273,DOWN=K274,LEFT=K276,RIGHT=K275,MENU=K32

then, you have to suffle the A,B,C,D values as your convenience

you can also do it as a per game basis by putting this line in a file named <game>.cf in the conf directory
for example mslug.cf for metalslug

[fusion_power]

With my fresh, new pandora I also tried GNGeo. But it is one of the programms where I had no luck with it yet. First, I had to find out that there must be a specific ROM path, I had an external ROm Folder but I can't select it. More strangely, the Emulator didn't "eat" the BIOS Files from my GP2X GNGeo, hm, I have the Unibios there, always worked onto the GP2X version. Maybe I must look again, the files weren't ziped for example. I also have to check the ROMS again, I didn't used the ones from GP2X version, I tested older roms from ages ago (stuff that works with KAWAKS and NeoRage )
but the problem of the not recognized Bios still stays. ^^"" Bios still goes into the ROM folder or has it to be onto a different place?

[MontyQ]

To configure button mapping, you have to edit the file named gngeorc in gngeo_pepone/conf and add the following line:

p1control A=K281,B=K279,C=K278,D=K280,START=K308,COIN=K306,UP=K273,DOWN=K274,LEFT=K276,RIGHT=K275,MENU=K32

then, you have to suffle the A,B,C,D values as your convenience

you can also do it as a per game basis by putting this line in a file named <game>.cf in the conf directory
for example mslug.cf for metalslug

Thank you for the tip, but how would I find out the value of the buttons on the pandora to know what number to put besdie the button I want to call ABCD ?

[Gyges]

ABCD is what the Neo Geo called them.
The default for GnGeo is A=X, B=B, A=C, Y=D.

[MontyQ]

With my fresh, new pandora I also tried GNGeo. But it is one of the programms where I had no luck with it yet. First, I had to find out that there must be a specific ROM path, I had an external ROm Folder but I can't select it. More strangely, the Emulator didn't "eat" the BIOS Files from my GP2X GNGeo, hm, I have the Unibios there, always worked onto the GP2X version. Maybe I must look again, the files weren't ziped for example. I also have to check the ROMS again, I didn't used the ones from GP2X version, I tested older roms from ages ago (stuff that works with KAWAKS and NeoRage )
but the problem of the not recognized Bios still stays. ^^"" Bios still goes into the ROM folder or has it to be onto a different place?

I used neogeo.zip for the bios left it zipped put it in the roms folder and used a newer rom set from say newer version of MAME left all games zipped and all works fine.

[MontyQ]

ABCD is what the Neo Geo called them.
The default for GnGeo is A=X, B=B, A=C, Y=D.

Awsome thank you so I can just change the letters and boom it shall work ?

ty

[Pinky]

With my fresh, new pandora I also tried GNGeo. But it is one of the programms where I had no luck with it yet. First, I had to find out that there must be a specific ROM path, I had an external ROm Folder but I can't select it. More strangely, the Emulator didn't "eat" the BIOS Files from my GP2X GNGeo, hm, I have the Unibios there, always worked onto the GP2X version. Maybe I must look again, the files weren't ziped for example. I also have to check the ROMS again, I didn't used the ones from GP2X version, I tested older roms from ages ago (stuff that works with KAWAKS and NeoRage )
but the problem of the not recognized Bios still stays. ^^"" Bios still goes into the ROM folder or has it to be onto a different place?

As said many times in this thread, you have to use recent MAME rom set (like 0.142). Bios goes zipped in the rom folder.