Xbox 360 Controller
#5
Posted 17 July 2011 - 07:56 PM
To install the application (only needed once):How can i use this?
- Extract xpad_0.1.7.tar.gz/bin to the applications folder on the SD card
- [firmware 1.6.1] Edit the file /mnt/ubifs/usr/gp2x/common.ini (located on the flash drive of your CAANOO) and add the following two lines to the end of the file:
[usbhost]enable = 1
- Restart your CAANOO
Every time you want to use a XBOX 360 controller:
- Execute the XBOX 360 Controller application.
- Start a game or emulator and enjoy!
Edited by DkSoul, 17 July 2011 - 08:06 PM.
#8
Posted 22 July 2011 - 08:33 PM
FW 1.6.1, I didn't have to modify common.ini .
Works fine with Picodrive, but on Mame, it's weird. The player keeps going to the same direction.
Vid here for Picodrive :
EDIT : Would it be possible to use a 360 PAD connected with USB, not in wireless ? Tried it but doesn't work.
Edited by BAFelton, 22 July 2011 - 08:50 PM.
#9
Posted 25 July 2011 - 01:05 PM
Yes, it should work. Unfortunately I don't have a wired controller to test (only the wireless that come with the XBOX 360).Works fine for me
Thanx a lot !
FW 1.6.1, I didn't have to modify common.ini .
Works fine with Picodrive, but on Mame, it's weird. The player keeps going to the same direction.
Vid here for Picodrive :
EDIT : Would it be possible to use a 360 PAD connected with USB, not in wireless ? Tried it but doesn't work.
Maybe the device ID is not on the module, please connect the controller to your computer and do a lsusb and post the results here.
And thank you for the video, it should help anyone that's trying to use the module!
Edited by DkSoul, 25 July 2011 - 06:27 PM.
#11
Posted 29 July 2011 - 04:10 PM
If you have a wired controller and have already confirmed that it doesn't work, then please connect it to your computer and post the results of the following linux commands: lsusb and usb-devicesHi,
Has anyone with a wired controller got this working or do I need to buy the 360 wireless controller dongle for it to work?
I have a usb controller and didn't realise it would not work, can anyone please advise on the above question?
Thanks
#12
Posted 29 July 2011 - 05:00 PM
If you have a wired controller and have already confirmed that it doesn't work, then please connect it to your computer and post the results of the following linux commands: lsusb and usb-devices
Hi,
Has anyone with a wired controller got this working or do I need to buy the 360 wireless controller dongle for it to work?
I have a usb controller and didn't realise it would not work, can anyone please advise on the above question?
Thanks![]()
ok sure, i haven't tried it yet but will do that as soon as I get a chance.
thanks for your speedy reply
#13
Posted 30 July 2011 - 12:41 AM
[/quote]
If you have a wired controller and have already confirmed that it doesn't work, then please connect it to your computer and post the results of the following linux commands: lsusb and usb-devices
[/quote]
ok sure, i haven't tried it yet but will do that as soon as I get a chance.
thanks for your speedy reply
[/quote]
Hi there,
I tried the wired controller using the instructions to get it working (I am not using the 1.61 firmware so didn't alter any files via telnet which is good because I can't do it after much trying.)
The wired controller does not work in games or on the menu
Tried running those commands but without knowing what im doing or where im doing it I just get the error "not found"
Sorry but I am too new to linux to be of any use
Can anyone confirm this just works with no messing around with an xbox wireless wireless and wireless xbox controller dongle? might just but one of thats the case
#14
Posted 30 July 2011 - 11:48 AM
Any modern linux should have one those two installed by default.
If you have a wired controller and have already confirmed that it doesn't work, then please connect it to your computer and post the results of the following linux commands: lsusb and usb-devices
Hi,
Has anyone with a wired controller got this working or do I need to buy the 360 wireless controller dongle for it to work?
I have a usb controller and didn't realise it would not work, can anyone please advise on the above question?
Thanks![]()
ok sure, i haven't tried it yet but will do that as soon as I get a chance.
thanks for your speedy reply![]()
Hi there,
I tried the wired controller using the instructions to get it working (I am not using the 1.61 firmware so didn't alter any files via telnet which is good because I can't do it after much trying.)
The wired controller does not work in games or on the menu
Tried running those commands but without knowing what im doing or where im doing it I just get the error "not found"
Sorry but I am too new to linux to be of any use![]()
Can anyone confirm this just works with no messing around with an xbox wireless wireless and wireless xbox controller dongle? might just but one of thats the case![]()
Perhaps someone else who's having the same problem can post that information.











