Hi all
I was doing a firmware update and lost power (yes, I know I should have had it plugged in!). Since then the caanoo won't power up or show any sign of life except the charging light comes on if I plug it in. I have looked all around this forum and the Internet in general and I can't find a solution. I tried to contact the service centre in Germany but they seem to have gone along with GPH support.
If anyone can save me and my Caanoo I would be very grateful.
Bricked? Caanoo
Started by
Hamish The PolarBear
, Jun 09 2012 06:33 PM
11 replies to this topic
#2
Hamish The PolarBear
-
- Members
-
- 6 posts
Member
Posted 09 June 2012 - 09:27 PM
UPDATE: I got a reply from an enquiry to Evildragon @ GP2X.de and it looks like I am out of luck. I will keep trying to re-flash it "blind" otherwise it is spares for when I can afford a new one. That will put me back 30% from getting a Pandora.
#5
erico
-
- Members
-
- 199 posts
GP32 Hardcore
- Gender:Male
- Location:Brasil
Posted 14 June 2012 - 05:02 AM
The customer services reflashed the caanoos, but are there still any of them?
I guess Ed does, but is it impossible to do home? (I guess not).
Edit:.. ops! didn´t read the post before, sorry.
Edited by erico, 14 June 2012 - 05:03 AM.
#8
Orkie
-
- GP Guru
-
- 2349 posts
Super Duper Mega GP Mania
- Location:UK
Posted 16 June 2012 - 07:02 PM
Well it is certainly possible (though a bit of a pain) to get the Caanoo to boot off UART. However, when I download a bootloader from a Caanoo firmware and tell it to run, nothing happens. I'm not sure I want to try to flash it without having had it boot from RAM first, so I shall have a bit more of a poke around and see if I can come up with anything.
#10
Toy Box
-
- Members
-
- 17 posts
Member
Posted 19 July 2012 - 05:16 AM
This may be worthless info but, I had thought I bricked my wiz a while back only to find out that it was because I was using an SDHC card. It was unable to boot but I managed to flash it anyways on a standard SD and it was as good as new. Firmware upgrades don't like SDHC.
#11
Hamish The PolarBear
-
- Members
-
- 6 posts
Member
Posted 20 July 2012 - 08:16 PM
Thanks but I already tried standard SD as well, it seems the boot loader is gone.This may be worthless info but, I had thought I bricked my wiz a while back only to find out that it was because I was using an SDHC card. It was unable to boot but I managed to flash it anyways on a standard SD and it was as good as new. Firmware upgrades don't like SDHC.
#12
Hamish The PolarBear
-
- Members
-
- 6 posts
Member
Posted 07 April 2013 - 05:30 PM
Sorry to post in an old thread but I haven't seen any news.
I just thought I would check back to see if anyone had any updates (Orkie?) I looked at the Unbrick Your Wiz pdf but the hardware side of it is not something I am up to I don't think. If I knew for sure that it would work with the caanoo then I would risk butchering my TVout cable (I can't use the caanoo one because I don't have a spare) but I am far from confident in my soldering skills.
Edited by Hamish The PolarBear, 07 April 2013 - 05:50 PM.
Reply to this topic
