Irishguy
Jul 17 2007, 12:27 PM
so i just got my gp2x from play-asia , and i am so happy , now i am wondering if you guys can recommand a good fast sd card to get . now it has the 3.0 firmware on it , so from what i am reading that means some sdhc cards will work yea, what about a standard SD thats more then 4 gb like an 8 gb ? . plus does anybody no a good screen protecter, the gp2x ones from play-asia.com are not the best , i was thinking of getting a gba or psp one and trying to make it fit .
virusx
Jul 17 2007, 12:44 PM
I'm not sure FW 3.0 has SHDC support.
Notaz' modified version of 2.1.1 called 2.1.2 has it.
You can find some more details on the board.
For the screen protector I don't know. I don't use one
linoleum13
Jul 17 2007, 01:50 PM
There are a couple of hacks that allow for SDHC cards out there. They seem to work fine so far but it is still in the testing stage and there is no guarantee your data will survive all operations. OPEN2X is a replacement firmware that will have good SDHC support eventually on release.
I would go with a normal SD card now. The card's speed does not really matter that much. Just get a card with a good reputation and get the biggest one you can!
Shadowsithe
Jul 17 2007, 02:04 PM
The Kingmax 4gb M-Series SD card has worked really well for me.
quasist
Jul 17 2007, 03:00 PM
Thou hast to protect thine screen with sword!
Orkie
Jul 17 2007, 03:02 PM
QUOTE(virusx @ Jul 17 2007, 01:44 PM)

Notaz' modified version of 2.1.1 called 2.1.2 has it.
No, the modified version is a modified version
of 2.1.2. It uses the 2.1.2 splash screen simply because it hasn't been changed.
Irishguy
Jul 17 2007, 06:46 PM
cheers guys , i thinking i will just play it safe with a normal sd card , 4gb of course , and yea i saw a Kingmax one they look good i will most likey get one of those ,
Irishguy
Jul 17 2007, 08:08 PM
hey guys when i connected my gp2x to the pc , with the usb cable , and go to built-in , its does not come up , all i get is a USB device not recognized message on my pc, do i need some drivers for it ?
Aki
Jul 17 2007, 09:04 PM
QUOTE(Irishguy @ Jul 17 2007, 10:08 PM)

hey guys when i connected my gp2x to the pc , with the usb cable , and go to built-in , its does not come up , all i get is a USB device not recognized message on my pc, do i need some drivers for it ?
I fixed that by plugging it into another USB port.
Shadowsithe
Jul 17 2007, 10:37 PM
A lot of the cables are defective. Try a camera cable that you know works.
Irishguy
Jul 18 2007, 11:37 AM
thanks again , it worked in another usb port . which is weird, cause i tryed something else in the port that did not work , and the other device was fine , oh well its working now , and all is good in the world lol.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.